manual

PLAYBACK ➤ Wireless playback of audio via Bluetooth connection En 28
1
Press the BLUETOOTH key on the remote control
when the unit is turned on.
Bluetooth is selected as the input.
• If you are unable to select Bluetooth as an input source, be sure that the
following settings have been applied.
– “Bluetooth” in the setup menu is set to “On” (p. 57)
– “Transmission” in the setup menu is set to “Off” (p. 57)
2
Turn on the Bluetooth device.
3
Select “YSP-1600” in the Bluetooth device list on
the device.
4
Play back a song on the Bluetooth device.
•Perform Bluetooth connection with the device and unit within 10 m (33 ft) of each
other.
• Adjust the volume level of the Bluetooth device as required.
•If a Bluetooth device has been connected before, the unit will connect to the last
connected device when the BLUETOOTH key is pressed with step 1. Terminate
this connection to connect to a different Bluetooth device.
• Setting “Network Standby” in the setup menu to “On” allows the unit to be turned
on and off with Bluetooth device operations.
Bluetooth connection is terminated in the following cases.
The indicator on the unit’s front panel turns off when the
connection is terminated.
•The Bluetooth device is turned off.
• The BLUETOOTH key is pressed for more than 3 seconds.
• The unit is turned off.
Playing back audio from a Bluetooth device
on the unit
BLUETOOTH
Glows
Glows steadily
Connection established
Flashes
Connecting
Terminating Bluetooth connection
BLUETOOTH