Operation Manual

Using this manual
5 En
INTRODUCTION
English
• This manual describes how to connect and operate this unit. For details regarding the operation of external components, refer to the
supplied owner’s manual for each component.
• About assembling this unit, refer to the supplied Quick Setup Guide.
• Operations in this manual use keys on the supplied remote control of this unit unless otherwise specified.
• y indicates a tip for your operation.
• This manual is printed prior to production. Designs and specifications are subject to change in part as a result of improvements, etc. In
case of differences between the manual and the product, the product has priority.
1 After assembling, install this unit in your listening room.
See the separate “Quick Setup Guide” and “Installation” on page 13.
2 Connect this unit to your TV and other external components.
See the separate “Quick Setup Guide” and “Connections” on page 15.
3 Prepare the remote control and turn on the power of this unit.
See “Getting started” on page 24.
4 Run AUTO SETUP.
See “AUTO SETUP (IntelliBeam)” on page 29.
5 Play back a source.
See “Playback” on page 39.
6 Change the beam modes.
See “Enjoying surround sound” on page 42.
7 Run MANUAL SETUP to fine-tune settings and/or set remote control codes.
See “MANUAL SETUP” on page 53 and “Remote control features” on page 71.
Using this manual
Notes
If you want to make additional settings
and adjustments