Operation Manual

Adjusting the system parameters
69 En
ADVANCED
OPERATION
English
This unit has additional menus that are displayed in the front panel display. These menus offer additional operations to
adjust and customize the way this unit operates.
When “F.PANEL KEY” is set to “F.PANEL: OFF” (see page 70), STANDBY/ON on the front panel is ineffective. Use STANDBY/ON
on the remote control instead to adjust the system parameters.
Follow the procedure below to enter the system
parameters.
1 Press STANDBY/ON on the remote control to
turn off the power of this unit.
2 Press and hold INPUT on the front panel and
press STANDBY/ON on the remote control to
turn on the power of this unit.
“MEMORY PROTECT” is displayed in the front
panel display.
3 Release INPUT on the front panel.
4 Set the operation mode selector to YSP.
5 Use / to select the parameter to be set,
then press ENTER.
See the table on page 70 for the types of parameters.
6 Use / to select and change the parameter
setting.
See the table on page 70 for the parameter settings.
Adjusting the system parameters
Note
Using the system parameters
SURROUND SOUND TV STAND
INPUT VOLUME STANDBY / ON –+
YRS
–
1000
CH LEVEL MENU
RETURNTEST
YSP
TV/AV
ENTER
MACRO
TV
INPUT2INPUT1
STB
TV
VCR DVD AUX
TVAV
POWERPOWERSTANDBY/ON
STANDBY/ON
INPUT
STANDBY/ON
MEMORYX PROTECT
INPUT
YSP
TV/AV
ENTER
ENTER
ENTER
ENTER