Electronic Keyboard User Manual

Voice Settings
48 PSR-E323/YPT-320 Owner’s Manual
Reference
Setting the Metronome Beats per
Measure, and the Length of Each Beat
In this example we’ll set up a 3/4 time signature.
1 Press and hold the [METRONOME] button
for longer than a second to select the number
of beats per measure function “TimeSigN”.
2 Use the number buttons [0]–[9], [+], [-] to
select the number of beats per measure.
A chime will sound on the first beat of each
measure while the other beats will click. All
beats will simply click with no chime at the
beginning of each measure if you set this
parameter to “00”.
The available range is from 0 through 60.
Select 3 for this example.
3 Press the [FUNCTION] button a number of
times to select the beat length function
“TimeSigD”.
The currently selected beat length will be
displayed.
4 Use the [+], [-] to select the beat length.
Select the required length for each beat: 2, 4,
8, or 16 (half note, quarter note, eighth note,
or 16
th
note). Select 4 for this example.
Setting the Metronome Volume
1 Press the [FUNCTION] button a number of
times until “MetroVol” appears.
2 Set the metronome volume by using the
number buttons [0]–[9], [+], [-].
TimeSigN
004
Number of beats per measure.
Hold for longer
than a second.
• The metronome time signature will synchronize to a style or
song that is playing, so these parameters cannot be changed
while a style or song is playing.
NOTE
TimeSigD
004
The length of one beat.
MetroVol
100
Metronome Volume