Owner's Manual

En 65
SETUP
The Advanced Setup menu can be used for unit initialization and other useful extended functions. The Advanced Setup menu can be operated as follows.
Displaying/Setting the Advanced Setup
menu
1
Switch this unit to the standby mode.
2
Press A while pressing and holding STRAIGHT on
the front panel.
Release the keys when “ADVANCED SETUP” is displayed on
the front panel display.
After approximately a few seconds, the top menu items are
displayed.
3
Use PROGRAM l / h to select the item to be set
from the following items.
In the Advanced Setup menu, you can set the following settings.
4
Press STRAIGHT repeatedly to select the value you
want to change.
5
Switch this unit to the standby mode, and then
switch it on again.
The settings become effective and the unit is powered on. If
initialization is selected, it will be performed when the unit is
powered on again.
Setting the impedance of speakers
(U.S.A. and Canada models only)
Changes the unit settings depending on the impedance of the
speakers connected. J3
Extended functionality that can be configured as needed (Advanced Setup menu)
PHONES
SILENT
CINEMA
TONE CONTROL
STRAIGHT
TV
BD
DVD
CD RADIO
INPUT
PROGRAM
SCENE
INFO
MEMORY PRESET FM AM
YPAO MIC
STRAIGHT
PROGRAM l / h
A
SP IMP. J1 Sets the impedance of speakers.
REMOTE ID Changes the remote control ID of a receiver.
TU J2 Selects one of the following FM/AM frequency steps.
INIT Initializes various settings for this unit.
6 MIN Select the impedance when 6Ω speakers are
connected.
8 MIN (Default) Select the impedance when speakers above 8Ω are
connected.
SPIMP.-8MIN
J
1 : U.S.A. and Canada models only.
J
2 : Asia and General models only.
J
3 : For detailed procedures of speaker impedance settings, refer to “(U.S.A. and
Canada models only) Changing speaker impedance” (☞
p. 12).