Owner's Manual

En 55
SETUP
Setting various functions (Setup menu)
■ Receiver operation via TV (HDMI Control)
Set the HDMI Control function to “On” to operate devices
connected via HDMI. If the TV or other external components
support HDMI Control (ex. Panasonic VIERA Link), you can use
the remote controls of those devices to operate some of this unit’s
functions, and to synchronize this unit with the operation of those
devices.
Please refer to “Switching the input source on this unit
automatically when listening to TV audio” (☞
p. 68) for
instructions.
■ Selecting an input source to assign audio
input for the TV
Select the input source that matches operations carried out on the
TV while the HDMI Control function is on.
When using a TV that supports Audio Return Channel function and
the function is enabled, the audio input for the TV is assigned to
the input source selected here. J2
■ Listening to TV audio via single HDMI
cable (Audio Return Channel)
You can enable or disable the Audio Return Channel function.
When using a TV that supports Audio Return Channel function and
the function is enabled, the TV’s audio output is transmit to this
unit via an HDMI cable.
The TV audio input to this unit is regarded as the input source
selected in “TVAudio.” J2
By means of this function, you do not need to connect the TV’s
audio output (digital audio output or analog audio output) to the
unit.
When the TV audio is input to the unit using Audio Return
Channel, “TV” is displayed on the front panel display.
■ Transmitting HDMI audio/video to the TV
during standby mode (Standby Through)
This function allows audio/video signals to continue to be
transmitted to a TV connected to HDMI jacks 1-4 even when this
unit is in standby mode.
Control
Off (Default) Sets HDMI Control to “Off.”
On Sets HDMI Control to “On.” J1
If this unit is connected to HDMI devices that do not support the
HDMI Control function, these functions will not operate.
TVAudio
AV1 to AV6 Assigns any of the AV1-6 input source for the audio
input from the TV.
AUDIO1/AUDIO2 Assigns AUDIO1 or AUDIO2 input source for the
audio input from the TV.
Default setting AV 4
• “TVAudio” is only displayed with the HDMI Control function
(Control) is set to “On.”
• Please refer to “Using the HDMI Control function” (☞
p. 67) for
setting instructions.
ReturnChan
Off (Default) Sets the Audio Return Channel to “Off.”
On Sets the Audio Return Channel to “On.”
• “ReturnChan” is only displayed with the HDMI Control function
(Control) is set to “On.”
• Please refer to “Single HDMI cable input to TV audio with Audio
Return Channel function” (☞
p. 69) for setting instructions.
SW
C
L
SL SR
R
AV4
TV
VOL.
Standby
Off (Default) Sets Standby Through to “Off.”
On Transmits audio/video signals from the selected
HDMI input source to the TV.
• When HDMI Control is “On,” Standby Through function is
automatically enabled and “Standby” is not displayed.
• When the Standby Through function is “On,” audio/video signals
will continue to be transmitted to the TV from the selected HDMI
input source when this unit is in standby mode. You can change
the HDMI input source to transmit signals during the standby
mode by using
dHDMI1-4 on the remote control. When the
input source is changed, the HDMI Through/iPod Charge
indicator on the front panel blinks twice.
• When the Standby Through function is on, the HDMI Through/
iPod Charge indicator on the front panel lights during the standby
mode. When this indicator is lit, this unit consumes 1 to 3 W of
power.
J
1 : When the HDMI Control is “On,” the Standby Through function is
automatically enabled. When this unit enters standby mode, the audio and
video signals from the last-selected HDMI input source will continue to be
transmitted to the TV.
J
2 : While the Audio Return Channel function is on, the jack selected for the input
source cannot be used.