Owner's Manual

En 25
CONNECTIONS
Set up the speaker parameters automatically (YPAO)
■ When an error message appears
during measurement
Check the content of the message from the “Error
message” (☞
p. 26) to resolve the problem, and carry out
the measurement process again.
Check the error code that appears in the display, and
carry out YPAO again by performing the following steps.
When “E-1,” “E-2,” “E-4” or “E-6” is
displayed:
1
Press jCursor C once, and then press
jCursor E to select “Exit.”
2
Press jENTER to finish YPAO, and switch
the unit to standby mode.
3
Check that the speakers are properly
connected.
4
Turn on the unit, and then carry out YPAO
again.
When “E-5,” “E-7,” “E-8” or “E-9” is
displayed:
1
Check that the environment is suitable for
accurate measurement.
2
Press jCursor C once to select “Retry.”
3
Press jENTER to carry out YPAO again.
When “E-10” is displayed:
1
Press jCursor C once to select “Exit.”
2
Press jENTER to finish YPAO.
3
Switch the unit to standby mode.
4
Turn on the unit again, and then carry out
YPAO.
■ When a warning message appears
after measurement
Check the content of the message from the “Warning
message” (☞
p. 27) to resolve the problem. You can
confirm the speaker that has the problem on the TV
screen.
Confirm the warning message:
Press jENTER once.
When multiple warning messages exist:
Press jENTER to confirm the warning message and
use jCursor D / E to display other warning messages.
When applying the results of measurement:
If an warning message is displayed, press jENTER to
switch display, use jCursor D / E to select “Set,” and
press jENTER.
When cancelling YPAO:
If an warning message is displayed, press jENTER to
switch display, use jCursor D / E to select “Cancel,”
and press jENTER.
ENTER
R
E
C
EIVER
SC
EN
E
O
PTI
ON
S
ETU
P
RETURN
V
O
LUM
E
E
NHANCER
SU
R. DE
CO
D
E
S
TRAI
G
H
T
D
IRE
CT
HDMI
AV
AUDIO
T
RAN
S
MIT
SLEEP
1
2
3
4
1
2
3
4
1
2
5
6
V-A
U
X
TU
NE
R
FM
I
NF
O
M
EM
O
R
Y
AM
PRESE
T
T
UNIN
G
MO
VI
E
M
US
I
C
S
TERE
O
BD
D
VD
TV
C
D
R
ADI
O
MU
TE
7
8
5
6
9
0
10
1
2
3
4
R
E
C
EN
T
TV
T
V V
OL
T
V
C
H
T
O
P
MENU
PO
P-
UP
MENU
D
I
S
PLA
Y
SOURCE
CO
DE
S
ET
I
NP
U
T
M
U
T
E
DOCK
[
A
]
[
B
]
j
jCursor C / D / E
jENTER
E-9:CANCEL
YPAO
VOL.
Error message (example)
NOTE
Although you can apply the results of measurement
when a warning message appears, doing so will not
provide optimal sound. We recommend you resolve
the problem and then carry out YPAO again.
SW
C
L
SL SR
R
WARNING(1)
YPAO
VOL.
Number of messages
SL SR
W-3:LEVEL
YPAO
VOL.
Warning message (example)
Speaker that has a
problem