User Manual
Table Of Contents
- Contents
- Introduction
- Charging and Powering
- Bluetooth® Connectivity
- Connecting via cable
- Wearing This Product
- Operation (Audio Playback and Phone Calls)
- Dedicated Application
- Troubleshooting
- Read this first
- Cannot connect
- Power will not turn on
- The product cannot be charged
- The product does not operate or play back
- No sound can be heard
- Sound can only be heard from one headphone
- Sound is not good or sounds strange
- The sound is distorted, noisy or choppy
- Initializing (performing a factory reset)
- Updating the firmware
- List of support centers
- Appendix
List of indicator displays and audio messages
The indicator displays and audio messages on this product are shown below.
Indicator display
(
Power on
Lights up for 1 second (blue) and turns off
(
Standby mode for pairing with Bluetooth device
Flashes (between red and blue alternately)
(
Searching for paired Bluetooth device
Flashes (blue)
(
Finished connecting to Bluetooth device
Lights up (blue, for approx. 5 sec) and turns off
(
Power off
Lights for 1 second (red) and turns off
Indicator display when charging
(
Charging
Lights up (red)
(
Charging completed
Not lit
Audio messages
(
Battery High
Plenty of battery charge remaining
(
Battery Medium
Moderate battery charge remaining
(
Battery Low
Small amount of battery charge remaining
(
Pairing
Start pairing (device registration)
(
Pairing Failed
Pairing unsuccessful
(
Connected
Finished connecting to Bluetooth device
(
Disconnected
Disconnected from Bluetooth device
(
Off
Disables AMBIENT SOUND, ADVANCED ANC
(
Gaming On
GAMING MODE enabled
49
Appendix > List of indicator displays and audio messages