Owner`s manual

8-5
EBU00807
Panel removal and installation
1. Panel A
The panel illustrated needs to be removed to
perform some of the maintenance described
in this chapter.
Refer to this section each time the panel has
to be removed or installed.
EBU13920
Panel A
To remove
1. Remove the seat. (See page 4-13 for
seat removal and installation proce-
dures.)
2. Remove the quick fastener and the bolts,
and then remove the panel by pulling it
out from the front of the ATV.
1. Quick fastener 2. Bolt
U5TG10.book Page 5 Monday, April 7, 2003 8:50 PM