Owner`s manual

4-11

● “LOCK” (four-wheel drive with the differential

gear locked): Power is supplied to the rear and

front wheels and the differential gear is locked.

Unlike in four-wheel drive, all wheels turn at the

same speed.

To lock the differential gear in four-wheel drive,

make sure the On-Command four-wheel-drive

switch is pushed in to the “4WD” position.

Stop the ATV, move the differential gear lock lever

to position (a), and then push the differential gear

lock switch in to the “LOCK” position. When the dif-

ferential gear is locked, the differential gear lock in-

dicator “DIFF. LOCK” will come on along with the

indicator “” in the multifunction meter display.

1. On-Command four-wheel-drive switch “2WD”/“4WD”

2. On-Command differential gear lock switch “4WD”/“LOCK”

1. Differential gear lock lever

2. On-Command four-wheel-drive switch “2WD”/“4WD”

DIFF.

LOCK

U3B410E0.book Page 11 Friday, April 14, 2006 9:13 AM