Owner`s manual
8-64
8
EBU25700
Installing a wheel
1. Install the wheel and the nuts.
NOTE:
● The arrow mark on the tire must point toward
the rotating direction of the wheel.
● Tapered nuts are used for both the front and rear
wheels. Install the nuts with their tapered side to-
wards the wheel.
2. Lower the ATV to the ground.
3. Tighten the wheel nuts to the specified
torques.
1. Arrow mark
1. Tapered nut
Tightening torques:
Front wheel nut:
55 Nm (5.5 m·kgf, 40 ft·lbf)
Rear wheel nut:
55 Nm (5.5 m·kgf, 40 ft·lbf)
U3B410E0.book Page 64 Friday, April 14, 2006 9:13 AM