Owner`s manual

8-25
8
NOTE:
Make sure that the O-ring is properly seated.
8. Install the new oil filter cartridge with an oil fil-
ter wrench, and then tighten it to the specified
torque with a torque wrench.
9. Install panel G.
10. Install the engine oil drain bolt, and then tight-
en it to the specified torque.
1. O-ring 1. Torque wrench
Tightening torque:
Oil filter cartridge:
17 Nm (1.7 m·kgf, 12 ft·lbf)
Tightening torque:
Engine oil drain bolt:
30 Nm (3.0 m·kgf, 22 ft·lbf)
U3B410E0.book Page 25 Friday, April 14, 2006 9:13 AM