Owner`s manual

8-55
8
EBU25640
Replacing the tail/brake light bulb
If the tail/brake light bulb burns out, replace it as
follows.
1. Remove panel G. (See page 8-9.)
2. Remove the bulb holder (together with the
bulb) by turning it counterclockwise.
3. Remove the defective bulb by pushing it in
and turning it counterclockwise.
4. Insert a new bulb into the bulb holder, push it
in, and then turn it clockwise until it stops.
5. Install the bulb holder (together with the bulb)
by turning it clockwise.
6. Install the panel.
EBU25650
Removing a wheel
1. Loosen the wheel nuts.
1. Headlight beam adjusting screw 1. Tail/brake light bulb holder
U23D10E0.book Page 55 Wednesday, March 14, 2007 1:50 PM