Owner`s manual

8-26

5. Add the recommended differential gear oil to

the brim of the filler hole as shown.

CAUTION:

ECB00410

Be sure no foreign material enters the differen-

tial gear case.

6. Install the oil filler bolt, and then tighten it to the

specified torque.

7. Check the differential gear case for oil leak-

age. If oil is leaking, check for the cause.

EBU23470

Coolant

The coolant level should be checked before each

ride. In addition, the coolant must be changed at

the intervals specified in the periodic maintenance

and lubrication chart.

EBU27122

To check the coolant level

1. Place the ATV on a level surface.

Tightening torque:

Differential gear oil drain bolt:

10 Nm (1.0 m·kgf, 7.2 ft·lbf)

1. Differential gear oil

2. Differential gear oil filler bolt

3. Correct oil level

Recommended differential gear oil:

See page 10-1.

Tightening torque:

Differential gear oil filler bolt:

23 Nm (2.3 m·kgf, 17 ft·lbf)

U23D10E0.book Page 26 Wednesday, March 14, 2007 1:50 PM