Owner`s manual

8-26
3. If the coolant is at or below the minimum
level mark, remove panel D (See
pages 8-7–8-8 for panel removal and in-
stallation procedures.), remove the reser-
voir cap, add coolant to the maximum
level mark, install the reservoir cap, and
then install the panel.
CAUTION:
_
Hard water or salt water is harmful to the
engine. You may use soft water if you can-
not get distilled water.
_
NOTE:
_
●
If water is added, have a Yamaha dealer
check the antifreeze content of the cool-
ant as soon as possible.
●
The radiator fan operation is completely
automatic. It is switched on or off accord-
ing to the coolant temperature in the radi-
ator.
_
If your ATV overheats, see page 8-64 for de-
tails.
Coolant reservoir capacity
(up to the maximum level mark):
0.3 L (0.26 Imp qt, 0.32 US qt)
EE.book Page 26 Tuesday, March 9, 2004 10:33 AM