User Manual

25
If the tone reflector is out of alignment
2.
After tone reflector adjustment is complete, tune the instrument.
Piccolo/Flute
Tuning is accomplished by sliding the head-
joint slightly toward or away from the body.
* Pull out on the headjoint to lower the pitch
and push it in to raise the pitch.
Alto Flute/Bass Flute
On the alto and bass flutes, tuning is accom-
plished by sliding the U-joint slightly toward or
away from the body.
* Do not adjust the space between the headjoint
and U-joint. Doing so will degrade the pitch bal-
ance making it difficult to tune the instrument.
•When too far right
•When too far left
Crown
Headcork
Crown
Body
U-joint
Headjoint
Headjoint
Body
Too far left
Too far right
When the tone reflector is too far from the
crown
Loosen the crown, push the tone reflector to
the left and re-tighten the crown.
* To prevent damage to the tone reflector, wrap
the end of the cleaning rod with a gauze before
carrying out the task.
When the tone reflector is too close to the
crown
Loosen the crown, push the tone reflector to
the right and re-tighten the crown.
* If the cork has become worn or loose due to
tone reflector slippage, replace the cork with a
new one (about once a year).
Headcork