User Manual

Saving / Loading Data
YC88/YC73 Owner’s Manual
25
In the File screens ([MENU] button → “File”), you can save/load the data of this instrument, including the entire system
settings, entire Live Set, or each Live Set Sound to/from a USB flash drive.
NOTE
Before using a USB flash drive, be sure to read “Precaution when using the USB [TO DEVICE] terminal” (page 26).
Saving the settings to a USB
flash drive
1. Connect a USB flash drive to the USB [TO
DEVICE] terminal of this instrument.
2. Call up the File screen.
Select the [MENU] button → “File.”
3. Select the contents you wish to save.
The following file types can be saved to a USB flash
drive.
4. Perform the save operation.
Select “Save” and press the [ENTER] button to call up
the screen for selecting the destination.
 When overwriting the existing file
Select the desired file from the displayed list.
 When saving as a new file
Select “New File.”
The “Save *** File” screen for editing file name
appears. For details on name editing operations, refer
to “Operations During Name Edit” (page 24).
Press the [ENTER] button to execute saving. The
messages “Saving..” → “Completed.” will appear on
the screen, and then return to the Top screen.
Loading the settings from a
USB flash drive
NOTICE
The Load operation overwrites any data previously existing
in this instrument. Important data should always be saved
to a USB flash drive connected to the USB [TO DEVICE]
terminal.
1. Connect a USB flash drive to the USB [TO
DEVICE] terminal of this instrument.
2. Call up the File screen.
Select the [MENU] button → “File.”
3. Select the contents you wish to load from the
USB flash drive.
4. Select “Load” and press the [ENTER] button.
5. Select the file in the USB flash drive.
To cancel the loading operation, select “Cancel” and
press the [ENTER] button.
6. Perform the load operation.
Select “Load All”/ “Load to ***” and then press the
[ENTER] button. The messages “Loading..” →
“Completed.” will appear on the screen, and then
return to the Top screen.
NOTE
For file types other than a Live Set Sound file, you can select
and load the one desired Live Set Sound included in the file.
In that case, select “Load Live Set Sound” in step 6 to call up
the screen for selecting the Live Set Sound in the file. Then
select the desired data, and execute loading. The data is
loaded into the currently selected Live Set Sound.
Saving / Loading Data
File type Description
Back Up File
All data including the system
settings.
Live Set All File
All the Live Set Pages.
Live Set Page File
Currently selected Live Set
Page.
Live Set Sound File
Currently selected Live Set
Sound.
File name edit screen
File type Description
Back Up File
(Extension: .Y0A)
All data including system
settings.
Live Set All File
(Extension: .Y0L)
All Live Set Pages.
Live Set Page File
(Extension: .Y0P)
One Live Set Page. The file will
be loaded to the currently
selected Live Set Page.
Live Set Sound File
(Extension: .Y0S)
One Live Set Sound. The file
will be loaded to the currently
selected Live Set Sound.