User Guide

INSTRUMENT AND CONTROL FUNCTIONS
3-13
3
2. Remove the key.
Rider seat
To remove the rider seat
1. Remove the passenger seat.
2. Push the rider seat lock lever, lo-
cated under the back of the rider
seat, to the left as shown, and then
pull the seat off.
To install the rider seat
1. Insert the projection on the front of
the rider seat into the seat holder
as shown, and then push the rear
of the seat down to lock it in place.
2. Install the passenger seat.
NOTE:
Make sure that the seats are properly
secured before riding.
1. Rider seat lock lever
1. Projection
2. Seat holder
U3C310E0.book Page 13 Wednesday, December 7, 2005 2:31 PM