User Guide

Effects Parameters 141
01V—Owner’s Manual
DELAY LCR
Three-tap delay (left, center, right).
1. (Maximum value depends
on the tempo setting)
2. For more information about the DELAY, NOTE, and TEMPO parameters, see “Setting
Delay, Freq, Note & Tempo Parameters” on page 137.
Parameter Range Description
DELAY L 0.0–2730.0 ms Left channel delay time
NOTE L
*1
Used in conjunction with TEMPO to determine DELAY
L
LEVEL L –100 to +100% Left channel delay level
DELAY C 0.0–2730.0 ms Center channel delay time
NOTE C *1
Used in conjunction with TEMPO to determine DELAY
C
LEVEL C –100 to +100% Center channel delay level
DELAY R 0.0–2730.0 ms Right channel delay time
NOTE R *1
Used in conjunction with TEMPO to determine DELAY
R
LEVEL R –100 to +100% Right channel delay level
FB.DLY 0.0–2730.0 ms Feedback delay time
NOTE FB *1
Used in conjunction with TEMPO to determine
FB.DLY
FB.GAIN –99 to +99%
Feedback gain (plus values for normal-phase
feedback, minus values for reverse-phase feedback)
HI.RATIO 0.1–1.0 High-frequency feedback ratio
HPF Thru, 21 Hz–8.0 kHz High-pass filter cutoff frequency
LPF 50 Hz–16.0 kHz, Thru Low-pass filter cutoff frequency
TEMPO
*2
25–300 bps
Used in conjunction with NOTE parameters to
determine DELAY L, DELAY C, DELAY R, and FB.DLY