Operation Manual

1
2
3
4
5
6
7
8
9
6-18
PERIODIC MAINTENANCE AND MINOR REPAIR
NOTE:
These limits may be different by
regulation from country to country.
If so, conform to the limits speci-
fied by the regulations of your own
country.
Tire inspection
Always check the tires before oper-
ating the motorcycle. If center
tread depth reaches the limit as
shown, if the tire has a nail or glass
fragments in it, or if the side wall is
cracked, contact a Yamaha dealer
immediately and have the tire
replaced.
1. Side wall
a. Tread depth
1
a
Manufacturer Size Type
CHENG SHIN 3.00-18 47P C-916
Manufacturer Size Type
CHENG SHIN
130/90-15M/C 66P C-915
REAR
Minimum tire tread
depth (front and rear)
1.6 mm
FRONT
EAU00681
w
8 Operating the motorcycle with
excessively worn tires
decrease riding stability and
can lead to loss of control.
Have excessively worn tires
replaced by a Yamaha dealer
immediately. Brakes, tires, and
related wheel parts replace-
ment should be left to a
Yamaha Service Technician.
8 Patching a punctured tube is
not recommended. If it is
absolutely necessary to do so,
use great care and replace the
tube as soon as possible with
a good quality replacement.
5AJ-9-E3 (XV125S)<3.1E> 4/5/0 5:01 PM Page 49