User Manual

MTX3/MTX5-D/MRX7-D/XMV Series/EXi8/EXo8 Remote Control Protocol Specications V3.1.0 rev10
7
0. Revision History
Version
Date Section Description
V3.1.0 Jun.19, 2017 Added Table of contents.
2,3,4,6,7,8 Rearranged format of section number and renumbering.
2.1. 1-7)
1-8)
1-10)
2.2. 2-5)
2-19)
2.3. 3-10)
3-11)
3-27)
3-28)
3-31)
Modied "Notication detail" and "Request details".
2.3. 3-31)
3-32)
Added description in Remarks.
3.2.3
3.2.4
3.2.5
3.2.5 1-10)
3.2.6
3.3.2
3.3.2 2-5)
3.3.5 2-16)
3.3.7
3.3.8 2-21)
3.4.3 3-10)
3-11)
Unied titles in command list of "2. Command List" and section names in command detail of
"3. Command Specications"
3.3.6 2-17)
2-18)
Corrected references information in "Details:".
3.4.3 3-16)
3-18)
3-20)
3-22)
3-24)
Added "Details:" for command options.
3.4.3 3-28)
:
3-32)
3-38)
3-41)
3-42)
Added "Notes:" for command option and detail.
3.4.3 3-16)
3-31)
3-32)
"Added commands "Details:".
3.4.3 3-28) Added command "option2" example.
3.4.3 3-27)
3-28)
3-31)
3-32)
3-37)
3-38)
Amended description in "Details:" and "Example".
6 Deleted "14. MY4-AEC Digtal I/O SRC" parameters in MTX3/MTX5-D part.
6 Rearranged tables according to the order of "7.Parameter List".
7 Added "PAGING","OSCILLATOR" and "PILOT TONE" parameters in MTX3/MTX5-D part.
7 Added "Paging" parameters in MRX7-D part.
7 Changed maximum value of "Utility/InputSelect" parameter in XMV part.
7 Added "ChUtility/InputSelect" parameter in XMV part.
7 Added "Note(*3)" for "Utility/InputSelect","ChUtility/InputSelect" parameters in XMV part.
7 Amended Block Diagram in XMV part.