Owner`s manual

6-1
2
3
4
5
6
7
8
9
OPERATION AND IMPORTANT RIDING POINTS
EAU15951
Read the Owner’s Manual carefully to
become familiar with all controls. If
there is a control or function you do not
understand, ask your Yamaha dealer.
WARNING
EWA10271
Failure to familiarize yourself with
the controls can lead to loss of con-
trol, which could cause an accident
or injury.
EAU45310
TIP
This model is equipped with a lean an-
gle sensor to stop the engine in case of
a turnover. To start the engine after a
turnover, be sure to turn the main
switch to “OFF” and then to “ON”. Fail-
ing to do so will prevent the engine from
starting even though the engine will
crank when pushing the start switch.
EAU45951
Starting the engine
NOTICE
ECA10250
See page 6-3 for engine break-in in-
structions prior to operating the ve-
hicle for the first time.
In order for the ignition circuit cut-off
system to enable starting, the side-
stand must be up.
See page 4-19 for more information.
1. Turn the key to “ON” and make
sure that the engine stop switch is
set to “”.
The following warning light, indica-
tor light and indicators should
come on for a few seconds, then
go off.
●
Engine trouble warning light
●
V-belt replacement indicator
●
Oil change indicator
NOTICE
ECA15022
If a warning light, indicator light or
indicator does not go off, see pages
4-2, 4-6, 4-7 or 4-4 for the corre-
sponding warning light, indicator
light or indicator circuit check.