Service manual

2 - 15
SPEC
ELECTRICAL SPECIFICATIONS
ELECTRICAL SPECIFICATIONS
Item Standard Limit
System voltage
12 V
Ignition system
----
Ignition system type CDI ----
Ignition timing (B.T.D.C.) 10.0° ----
Advancer type Digital ----
Pickup coil resistance 130 ~ 150 Ω ----
CDI unit model/manufacturer 5510-F/MITSUBA ----
Ignition coil
Model/manufacturer 4719/MITSUBA ----
Minimum ignition spark gap 6 mm (0.24 in) ----
Primary coil resistance 0.225 ~ 0.275 Ω at 25 °C (77 °F) ----
Secondary coil resistance 1.89 ~ 2.31 kΩ at 25 °C (77 °F) ----
Spark plug cap
Material Resin ----
Resistance 10.0 kΩ ----
Charging system
System type AC magneto
Model/manufacturer 5425-H/Mitsuba ----
Standard output 14.0 V, 235 W at 5,000 r/min ----
Stator coil resistance 0.385 ~ 0.415 Ω at 20 °C (68 °F) ----
Rectifier/regulator
Regulator type Semi conductor-short circuit ----
Model/manufacturer SH678-11/SHINDENGEN ----
No-load regulated voltage 14.1 ~ 14.9 V ----
Rectifier capacity 22.0 A ----
Withstand voltage 200.0 V ----
Battery
Model YTX9-BS ----
Voltage, capacity 12 V, 8.0 Ah ----
Manufacturer YUASA ----
Ten hour rate amperage 0.8 A ----
Headlight
Bulb type Halogen bulb ----
Bulb (voltage, wattage
×
quantity)
Headlight 12 V, 35.0 W/35.0 W × 2 ----
Auxiliary light 12 V, 5.0 W × 2 ----
Tail/brake light 12 V, 5.0 W/21.0 W × 2 ----
Front turn signal light 12 V, 10.0 W × 2 ----
Rear turn signal light 12 V, 10.0 W × 2 ----
License plate light 12 V, 5.0 W × 1 ----