Operator`s manual

4-18
E
EJU00566a
● Bearing housing grease nipple
This service should be done first after 10
hours or 1 month by your Yamaha water
vehicle dealer.
Fill the bearing housing with water resistant
grease through the grease nipple.
After first service: Every 100 hours or 6
months (you may do this yourself)
EJU00570
CHOKE CABLE ADJUSTMENT
Pull the choke knob out until it stops.
Release the knob. The knob should not
move. If it moves back on its own, tighten
the friction adjustment 1 slightly. If the knob
is difficult to move, loosen the friction adjust-
ment slightly.
Grease capacity:
33.0 ~ 35.0 cm
3
(1.11 ~ 1.18 oz.)
Grease capacity:
6.0 ~ 8.0 cm
3
(0.20 ~ 0.27 oz.)