User Guide

13
D Bundle the #1 and #2 high-ten-
sion cords using this clamp.
Clamp these cords above the #2
head cover mounting bolt.
E Route the air cleaner drain hose
through the right side of the ve-
hicle with a clearance above the
starter motor.
F Mount the square fixture of the
clutch hose in parallel with the
cover.
SPEC
CABLE ROUTING
G After securing the side stand
switch lead wire using this
clamp, first route the lead wire
between the pickup cover, the oil
filter cover, the A.C. generator,
and the starter motor. Next, as
with the engine lead wire, route
the lead wire through the right
side of the vehicle.
H Clamp the clutch hose.
I Secure the grommet of the
clutch hose by use of this holder
wire of the gusset.
J Pass the horn lead wire between
the clutch hose and the frame,
then pull the lead wire out to the
front, and connect the lead wire
to the horn.
K Connect the black-coupler-
equipped lead wire to the #1 and
#4 ignition coils.