User Manual

Chapter 5 Main panel window
Amp Editor Owner’s Manual
69
 “GPI” dialog box
Click the [Device] menu command [GPI...] to access the “GPI” dialog box. Here you can make GPI input/output
settings for the device. Click the [OK] button to apply the modified settings and close the dialog box.
 [Device]
From the list, select the device whose settings you want to edit.
 GPI IN
For each port, you can specify which parameter of the device will be modified by a signal input to GPI IN.
The column at the far left indicates the port number.
 Function
Specifies the function that will be controlled by GPI IN. Click here to access a list from which you can
select the function to be assigned to the GPI IN port. You can select one of seven functions: [No Assign],
[Scene Recall], [Mute], [Standby/On], [Parameter Value Edit], [Direct Parameter Value] and [Emergency
Scene Recall]. The editable content of [Device], [Parameter], [Min], [Max], and [Trigger Type] will
change according to the function you select.