Service manual

ELECI ] AUTO CHOKE SYSTEM
3. Inspect:
oChoke relay unit
Choke unit inspection steps:
,Connect batteries by which the applied voF
tage is 18V between the white _ and the
Black {_}, terminals.
DC20V O
NOTE:
The relay unit needs at least 13.5V to be ac-
tivated.
oSet the tester selector to "DC2OV" position.
®Measurement of the voltage between the
6VBattery 12VBattery Green/Red {3} and the Black _ terminals is
should be S2V:
olf less than 12V, replace the choke unit. .............
(@ Brown terminaJ
STATOR COiL RESISTANCE TEST
1. Measure:
oStator coil resistance
Out of specification-* Replace.
E Stator Coil Resistance
{WhiteoWhite):
0.44[_ ± 15% at 20°C (68°F}
Refer to "STATOR COIL RESISTANCE TEST"
page 6_22o
6-55