User Guide

2 - 27
SPEC
CABLE ROUTING DIAGRAM
1
Starter motor lead
2
Negative battery lead
3
Wire harness
4
Clamp
5
Taillight lead
6
Coolant reservoir breather hose
7
Coolant reservoir hose
8
Positive battery lead
9
Starting circuit cut-off relay
0
Battery
È
Position the starter motor lead, negative battery
lead and wire harness in the tank damper slit.
É
Fasten the wire harness.
Ê
Do not allow the taillight lead to slacken.
Ë
Fasten the coolant reservoir breather hose, cool-
ant reservoir hose and rectifier/regulator lead.
Ì
Fasten the coolant reservoir breather hose and
coolant reservoir hose.
Í
Pass the coolant reservoir hose on the outside of
the coolant reservoir breather hose.