User Guide

5 - 51
CHAS
8. Install:
• Washer 1
• Steering stem nut 2
T
R
.
.
145 Nm (14.5 m · kg, 105 ft · lb)
9. Install:
• Steering stem cap 1
10. After tightening the nut, check the steering
for smooth movement. If not, adjust the
steering by loosening the steering ring nut
little by little.
11. Adjust:
• Front fork top end a
* For AUS, NZ and ZA
12. Tighten:
• Pinch bolt (upper bracket) 1
• Pinch bolt (lower bracket) 2
CAUTION:
Tighten the lower bracket to specified
torque. If torqued too much, it may cause
the front fork to malfunction.
Front fork top end (standard)
a
:
5 mm (0.20 in)
* 10 mm (0.39 in)
T
R
.
.
23 Nm (2.3 m · kg, 17 ft · lb)
T
R
.
.
20 Nm (2.0 m · kg, 14 ft · lb)
STEERING