Operation Manual

BEFORE YOU BEGIN
15
REAR PANEL
DIAGRAM & FEATURES
THRU OUT
IN
MIDI
SUSTAIN FOOT
VOLUME
R L/MONO
OUTPUT
PHONES
FOOT
CONTROLLER
12
8
7
34
6
5
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
ATTENTION:RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR.
WARNIING TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK. DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
MODEL SER.NO.
PATENTS
US4584921 US4967635
US4738179 US4731835
US4763553 US4731835
YAMAHA CORPORATION
MADE IN JAPAN
VS25750
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS
SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1)THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2)THIS DEVICE
MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT
MAY CAUSE UNDESIRED OPERATION.
POWER
ON/ OFF
AC INLET
POWER SWITCH
Press to turn the power on or off.
POWER CONNECTOR
Attach the power supply cord and plug into the AC power outlet.
MIDI CONNECTORS
For connecting other MIDI devices. The MIDI IN connector receives MIDI data from
an external sequencer or other MIDI device which will control or transmit data to the
W5/W7. The MIDI THRU connector simply passes along the data received at the
MIDI IN connector, allowing convenient chaining of MIDI devices. The MIDI OUT
connector transmits data corresponding to all W5/W7 performance operations, or
bulk data when one of the MIDI data transmission functions are activated.
SUSTAIN JACK
An optional Yamaha FC4 or FC5 foot switch connected here will permit press-on/
release-off sustain control by foot. You can also determine the expression level limit.