Operation Manual

UTILITY MODE
149
OTHER SETUP
The Other Setup function lets you adjust the LCD contrast and determine if the confir-
mation screen will appear before an editing operation is engaged.
GREETING MESSAGE
The Greeting Message function lets you create a two-line, 20-character per line message
that will appear on the screen during the start-up process after turning on the power.
ACCESSING GREETING MESSAGE
To access the Greeting Message function, from within the
Utility Mode main menu screen, position the cursor over
GREETING MESSAGE and press ENTER, or simply press
[F8] ( Msg ). The Greeting Message screen will appear.
CREATING A GREETING MESSAGE - To create a
greeting message, choose the upper or lower message
line using [F6] and [F7]. Position the character pointer
with [F4] and [F5], and select characters with the
CURSOR keys, INC/DEC, or the JOG. After you ve
created your message, press EXIT to return to Utility
Mode main menu, or any MODE button on the panel.
A space can be entered by pressing [F3] ( [SPC] ).
ACCESSING OTHER SETUP
To access the Other Setup function, from within the Utility
Mode main menu screen, position the cursor over OTHER
SETUP and press ENTER, or simply press [F7] ( Other ).
The Other Setup screen will appear.
LCD CONTRAST (0 ~ 31) - For adjusting the contrast
of the LCD. Lower values make the screen lighter, and
higher values make the screen darker.
EDIT CONFIRM (off, on) - When Edit Confirm is
turned on, the W5/W7 will give you an opportunity to
change your mind before executing an edit operation,
asking Are You Sure? Yes[INC]/No[DEC] after you
press ENTER. When turned off, the confirmation will
not appear, i.e., the edit operation will be executed as
soon as you press ENTER.