Specifications

VOICE MODE
107
VOICE PLAY
In Voice Play Mode you can select voice banks and voices for the currently selected track
and hear them in their original state, without system effects or other multi parameters
applied. In Voice Play Mode, the Insertion Effect which is assigned to voice in Voice Edit
Mode is also applied to the selected voice.
ENTERING AND EXITING VOICE PLAY MODE
To enter Voice Play Mode, simply press the VOICE button
in the Mode section on the panel. To exit Voice Play Mode,
simply press another MODE button.
NOTE: When switching back to Song Play Mode from Voice Play
Mode, the Voice Play settings (i.e., the voice in its original state)
will be maintained for that specific track. To restore the original
multi setting for the track, you must switch to another song and
then back again.
ACCESSING VOICE PLAY FUNCTIONS
When entering Voice Play Mode, the Voice Play screen will
appear, from where you can access the Voice Play functions.
MIDI CHANNEL NUMBER (Ch. 1~16)
The MIDI channel number also indicates the currently
selected track in the multi (Track 1~16), since each
instrument track number corresponds with its respec-
tive MIDI channel number.
VOICE BANK (G, P, I, S, E*, GD, PD, ID, SD, ED*)
Displays the one-letter (for normal voice) or two-letter
(for drum voice) code that represents each voice bank.
(* NOTE: E and ED will display only if the optional
Expansion Wave/Voice Board has been installed.)
VOICE NUMBER (001 ~ 128)
Displays the currently selected voice number of the
voice bank.
VOICE NAME
Displays the Voice Category and name of the currently
selected voice. (If you select a different instrument track
while viewing this screen, the name and location of the
track s instrument voice will display.)
VOICE BANK SELECT
Pressing [F6] and [F7] lets you choose a voice bank. The
one- or two-letter voice bank code will begin flashing,
indicating that you must then press ENTER to lock in
the desired bank. (For more information about voice
banks, see page 25.)
VOICE DIRECTORY
Pressing [F8] ( Dir ) accesses the Voice Directory, which
displays the voices in the currently selected voice bank
by list, eight at a time.
Within the Voice Directory you can select voices by
scrolling through the entire list using the JOG, INC/
DEC, or the CURSOR keys, or enter a specific number
on the KEYPAD the list will advance accordingly. (You
can also select voice banks from within the Voice
Directory.)
NOTE: In Voice Play Mode, basic settings are configured as
follows: Volume = 100; Pan = Center; Insertion Effect = on;
System Effect Sends = vce; System Effect Type/Parameter =
default; System Effect Return = default; Tune = 0; Note Shift = 0,
Pitch Bend Range = vce.