Owner`s manual
E
3-4
Z250, LZ250
Mount the outboard motor so that the anti-
cavitation plate is in alignment with the bot-
tom of the boat.
104014
104025
130mm ( 5 in.)
VZ225, VZ250
Mount the outboard motor so that the anti-
cavitation plate is about 130 mm (5 in.)
above the bottom of the boat.
NOTE:
8 The optimum mounting height of the
outboard motor is affected by the boat
and motor combination and the
desired use. Test runs at different
heights can help determine the opti-
mum mounting height. Consult your
Yamaha dealer or boat manufacturer
for further information on determining
the proper mounting height.
8 For instructions on setting the trim
angle of the outboard motor, see
“Trimming outboard motor” in this
chapter.
60V-9-13-3 7/28/03 5:36 PM Page 5