User Manual

9. Online and synchronization
You can connect devices to the computer, and send them settings that were created using ProVisionaire Design.
You can also load data from devices into ProVisionaire Design.
The state in which the devices and ProVisionaire Design are operating in synchronization is called the "online
state." The action of bringing them into this state is called "Synchronization."
Synchronization will match the settings of ProVisionaire Design and the devices themselves; when the settings
of both are in a matching state, they will go online, allowing the devices to be controlled in real time.
9.1. Online
To enter the online state in ProVisionaire Design, click the toolbar button [Online] to access the "Synchronization"
dialog box.
Alternatively, select “Go Online - From Devices” from the [File] menu.
9.1.1. "Synchronization" dialog box
•
[To Device] option button
Choose this if you want the settings of ProVisionaire Design to be applied to the devices.
•
[From Device] option button
Choose this if you want the settings of the devices to be reflected in ProVisionaire Design.

The system must have been previously configured using ProVisionaire Design.
In addition, you need to use the project file that was created at that time.
9. Online and synchronization
ProVisionaire Design User Guide | 51