User Manual

23.8.1. "Microphone Settings" component editor
The tracking speed and range can be checked/adjusted.
The automixer settings can also be checked/changed.
•
Beam Tracking Speed
Set the reaction time at which the beam follows the talker.
◦ Slow
his setting increases the stability of volume changes, but slows the talker tracking. Select this
mode when the volume changes frequently due to a room with long reverberation times.
◦ Fast
Default setting. Well-balanced setting between volume change stability and talker tracking.
•
Auto mixing
Set the type of automatic audio mixing of microphone beam inputs.
◦ 1Ch.Gating
Select this setting for single beam mode. This provides higher clarity but more volume variation for
a small group of talkers in a reverberant room with long reverberations times.
◦ 2Ch.GainSharing
Default setting. Select this setting for gainsharing of two beams. Well balanced setting between
clarity and volume variation.
◦ 4Ch.GainSharing
Select this setting for gainsharing of four beams. This mode provides less volume variation with
lower clarity for a more natural sound with many talkers in a good acoustical room with low
reverberation times.
◦ All Mix
Select this mode mixing of four beams. This mode provides less volume variation and clarity with
the most natural sound with many talkers in a good acoustical room with low reverberation.
23. Microphones : RM-CG
ProVisionaire Design User Guide | 309