User Manual

【Parameter Sets】
•
[New] button
Creates a new parameter set.
•
[Add Device] button
Registers an individual device to the parameter set.
•
[Delete] button
Deletes the selected parameter set, DME7, component, or parameter.

If you changed the members that were registered to a parameter set, you must overwrite and
save the snapshots again.
•
[Duplicate] button
Duplicates the selected parameter set. If you want to duplicate the snapshots as well, add a check mark
to [Duplicate Snapshots Also] in the “Duplicate” dialog box that appears.
•
[Recall Settings] button
To start or stop file playback via the GPI Out or SD card along with the snapshots, use the “Recall
Settings” dialog box to set up.
13. Audio Processors : DME7
138 | ProVisionaire Design User Guide