User Manual

To remove protection, proceed as follows.
1.
Choose [Edit] menu → [Protect User Defined Block].
The “Unprotect User Defined Block” dialog box appears.
2.
Enter the PIN Code that was specified when locking, and click the [OK] button.
The “Protect User Defined Block” dialog box appears.
3. Clears the check mark from the “Protect contents of locked User Defined Blocks” check box.
4.
Click the [OK] button.
Protection is removed. The [Lock Mode] setting is maintained.
13. Audio Processors : DME7
ProVisionaire Design User Guide | 135