Owner's Manual

Studio Manager Version 2 Owner’s Manual

1 Start Studio Manager.

As a stand-alone application in Windows 2000/XP: Click the Start button, move the cursor to [Programs

(All Programs)], then [YAMAHA Studio Manager], then click [Studio Manager].

As a stand-alone application in Mac OS X: Select and open the “Applications” folder, the “YAMAHA”

folder, then the “Studio Manager” folder, then double-click “SM2.”

Cubase versions SX 3.0 and later: From Cubase’s [Device] menu, choose [Yamaha Studio Manager] to open

the Studio Manager window. (Studio Manager starts running when Cubase is started.)

2 Select the devices you want to edit.

In the Setup window, open the Modify Workspace page. The

Device Editor section lists the names of the installed devices.

Highlight the desired device name, then double-click it or click the

[Add->] button.

The selected device name is added in the Workspace section.

3 Specify the desired MIDI ports.

Select the [MIDI Settings] tab and specify the MIDI In/Out Ports

to which the hardware product are connected. However if you

want to use Studio Manager in Cubase, you’ll need to specify that

MIDI port within Cubase.

NOTE: Use the following button and checkbox, if necessary:

[Remove].............Removes the selected device from the

Workspace section.

[Set Default]........ Mark this checkbox, then click the [Apply] or

[OK] button. The next time you start Studio

Manager, the current Setup window settings

will be automatically selected.

NOTE: To activate MIDI ports in Studio Manager, you must

specify the MIDI ports in this MIDI Ports tab and in the Editor for

the console or device.

NOTE: Use the following button, checkboxes, and pull-down

options, if necessary.

[Update Ports] .... If you click this button, Studio Manager will

search for MIDI ports that have been enabled

since you started the application. If no port is

detected, restart Studio Manager.

[MIDI Thru] ........ If you mark this checkbox, then use the pull-

down options to select a port for MIDI In/Out,

a MIDI signal will be input from a port

assigned as MIDI In, and routed to and

output from a port assigned as MIDI Out.

[Set Default] ....... Mark this checkbox, then click the [Apply] or

[OK] button. The next time you start Studio

Manager, the current Setup window settings

will be automatically selected.

Starting and Conﬁguring Studio Manager