Service manual

2-9
COOLING FAN BELT TENSION ADJUSTMENT
INSP
ADJ
NOTE:
COOLING FAN BELT TENSION ADJUST-
MENT
1. Adjust:
S Fan belt deflection
a
Pushed at belt center by hand.
Out of specification Adjust.
Fan belt deflection
a
:
8 mm (0.31 in)/
4 6 kg (8.8 13.2 lb)
2. Adjust:
S Fan belt deflection.
Adjustment steps:
S Remove the recoil starter assembly, drive
pulley and fan belt.
S Remove the driven pulley (outer half)
1
and
shim(s)
2
.
S Adjust the drive belt tension by adding or re-
moving a shim(s)
2
.
Install the removed shim(s) on the outside of the
driven pulley. Do not dispose of the removed
shim(s).
Adding shim Belt tension decreases.
Removing shim Belt tension increases.
Shim size
Part number Thickness
90214-17017 0.5 mm (0.02 in)
90214-17018 1.0 mm (0.04 in)
S Tighten the driven pulley nut
1
.
Driven pulley nut
1
:
43 Nm (4.3 mSkg, 31 ftSlb)
S Install the fan belt
2
and drive pulley
3
.