Service manual

7-10
LIGHTING SYSTEM
ELEC
a
b
c
WARNING
1
1
2
3
a
b
BULB(S)
1. Remove:
D Headlight bulb
a
D Tail/brake light bulb
b
D Meter light bulb
c
2. Connect:
D Pocket tester
(to the bulb terminals)
Keep flammable products and your hands
away from the bulb while it is on; it will be
hot. Do not touch the hulb until it cools
down.
3. Check:
D Bulb(s)
Terminal
Continuity
– Yes
– Yes
HEADLIGHT BEAM SWITCH
1. Disconnect:
D Headlight beam switch coupler
2. Connect:
D Pocket tester
(to the headlight beam switch coupler)
3. Check:
D Headlight beam switch continuity
Faulty  Replace.
Switch position Continuity Continuity
HI No Yes
LO Yes No
LIGHTING COIL
1. Measure:
D Lighting coil resistance
Out of specification  Replace.
Lighting coil resistance:
(Yellow – Black)
0.3 Ω ± 20% at 20_ (68_F)