User Guide

4B-1
Chapter 4 Part B
Ignition system (XV700-1100 models)
Contents
Sect/on
General information 1
Igniter - check, removal and installation 5
Ignition coils - check, removal and installation 3
Ignition system - check 2
Section
Pick-up coils - check, removal and installation 4
Spark plugs - replacement See Chapter 1
Pressure sensor (1984 and later XV1000 and XV1100 models) -
testing, removal and installation 6
Specifications
Ignition coil
1981 through 1983 models
Primary resistance 2.7 ohms +/-15% at 20-degrees C (68-degrees F)
Secondary resistance 8500 ohms +/-15% at 20-degrees C (68-degrees F)
1984-on models
Primary resistance 3.57 to 4.83 ohms at 20-degrees C (68-degrees F)
Secondary resistance 11,220 to 15,180 ohms at 20-degrees C (68-degrees F)
Spark plug cap resistance
All except TR1 models 5000 ohms at 20-degrees C (68-degrees F)
TR1 models 7000 ohms at 20-degrees C (68-degrees F)
Spark plug arcing distance 6 mm (1/4 inch)
Pick-up coil resistance
Dual pick-up coils 124 to 186 ohms at 20-degrees C (68-degrees F)
Single pick-up coil..... 182 to 222 ohms at 20-degrees C (68-degrees F)
Pressure sensor output voltage 3.00 +/- 0.05 volts
Ignition timing Not adjustable