Service manual

3-55
CHK
ADJ
6. Install:
8battery
7. Connect:
8battery leads
(to the battery terminals)
cC
First, connect the positive battery lead
11
11
1,
and then the negative battery lead
22
22
2.
8. Check:
8battery terminals
Dirt J Clean with a wire brush.
Loose connection J Connect properly.
9. Lubricate:
8battery terminals
Recommended lubricant
Dielectric grease
10. Install:
8battery holder
8battery cover
8mat
Refer to “COVER AND PANEL”.
CHECKING AND CHARGING THE BATTERY/
CHECKING THE FUSE
EAS00181
CHECKING THE FUSE
The following procedure applies to all of the fuse.
cC
To avoid a short circuit, always set the main
switch to “OFF” when checking or replacing
a fuse.
1. Remove:
8mat
8battery cover
Refer to “COVER AND PANEL”.
2
1