User Guide

9
English
1 Turn the power on.
2 Open the disc tray and load discs.
3 Close the disc tray.
4 Start a disc play.
Play will begin from the first track of Disc 1 automatically.
* If you want to play a desired track on another disc, see
the next page.
Note
Additionally, you can close the disc tray by the following ways.
If the tray is closed by these ways, play will begin
automatically.
●
Press the PLAY/SELECT button. (Play will begin from the
first track of Disc 1.)
●
Press a numeric button.
●
Press the front edge of the disc tray gently. (Play will begin
from the first track of Disc 1.)
POWER
MPX
KARAOKE
+10
1
NATURAL SOUND VIDEO CD CHANGER
VIDEO CD
POWER
OPEN/CLOSE
OPEN/CLOSE
Label side
upward.
Disc tray
This unit stops at the beginning of the first track on the disc.
Notes
●
If the STOP/RETURN button is not pressed (except when
“KARAOKE” is illuminated on the display), play will not stop
until the last track on the last-numbered disc has been
played.
●
When you press the STOP button during Video CD
playback except in the Playback Control and Karaoke
modes, the unit stops five seconds before the playback
ends and displays the time. The unit is in the resume play
mode.
Pressing the PLAY button in the resume play mode starts
playing from the last playback position.
Pressing the STOP button again when the unit is in the
resume play mode cancels the resume play mode.
RETURN
STOP
BASIC OPERATIONS
This manual mainly describes how to operate this unit by using the remote control transmitter. To operate this unit from
the front panel, use the same named buttons on the front panel.
Loading discs and starting disc play
SELECT
PLAY/REPEAT
KEY CONTROL
KARAOKE MPX
OPEN/CLOSE
ON SCREEN
PROG ENTER S/F REPCANCEL
1234 5
67890
+10
DISC SKIP
TIME INDEX
INDEX
SEARCH
SKIP
PREV
RETURN SELECT
NEXT
INTRODIGEST
PAUSESLOW PLAY/REPEAT STOP
1
2, 3
4
STOP/
RETURN
To stop play
For information about the Playback Control operation for Video CDs, version 2.0, refer to pages 18–20.