Owner's Manual

Chapter 6 Component Guide
DME Designer Owner’s Manual
360
■ Parametric Equalizer
When you click [PEQ] button for the crossover processor, it opens the parametric equalizer editor
window. Here you can make parametric equalizer settings for each frequency band.
Name Function
1 PEQ Curve Displays the PEQ curve.
Parameter Setting Range Function
2 Type PEQ
L.SHELF 6 dB/Oct
L.SHELF 12 dB/Oct
H.SHELF 6 dB/Oct
H.SHELF 12 dB/Oct
HPF
LPF
Select the filter type from a menu.
3 Q: 0.1 to 16.0 Sets the frequency band width for each band.
4 Frequency 20 Hz to 20 kHz Sets the frequency for each band.
5 Gain -18 dB to +18 dB Sets the gain for each band.
6 Bypass ON/OFF Turns ON bypass for each band.
7 PEQ On ON/OFF Turns the PEQ ON.
1
2
3
4
5
6
7
[Crossover Processor-PEQ] editor window