Owner's Manual

ManualsBrandsYamaha ManualsOtherV2

Getting Started

DME Designer Owner’s Manual

Refer to the “DME-N Remote Control Protocol Speciﬁcations” document for details about the

communication protocol. Information about the “DME-N Remote Control Protocol Speciﬁcations”

document can be found at the Yamaha pro Audio website (URL below).

http://www.yamahaproaudio.com/

• It is possible to specify whether listed events will be executed by the Event Scheduler.

(page 125)

• The order of same-time events can be changed in the Event Scheduler. (page 125)

• Exceptions can be speciﬁed for Event Scheduler execution day/time. (page 93)

• Event Scheduler execution times can be speciﬁed in 1-second increments. (page 92)

• Head amp gain and MY-Card can be set via GPI, MIDI, User deﬁned Button, DAW Control.

• Parameter values, scene recall, GPI output, Wave ﬁle playback, and head amp gain can be set

via the User Deﬁned Buttons. (page 118)

• The Component Lock function dialog is separate from the Parameter List dialog. (page 129)

• Shortcuts can be freely set as required. (page 136)

• Files can be saved in the DME unit. (page 61)

•A [Close All Editor Windows] button has been added to the Window menu. (page 60)

• External head amp parameters will be recognized by the DME unit when either the DME or the

external head amp (AD824, AD8HR) are turned on. Execute a scene recall to send DME settings

an external head amp.

• This manual is now separate from the DME Designer installer, and can not be accessed from the

DME Designer menus.

■ Designer Window

• The following operations can be carried out via the shortcut keys.

- Navigator

- Activate Navigator

- Activate Toolkit

- Activate Design Window

- Select Left Port and Start Wiring

- Select Right Port and Start Wiring

- Wire Auto Single to Right

- Wire Auto Multi to Right

- Wire Auto Single to Left

- Wire Auto Multi to Left

- Delete Wire

• It is now possible to simultaneously edit multiple objects of the same type.

Example: Change the thickness or color of multiple wires at once.

• Files related to user modules (user module ﬁles, library ﬁles, user module editor ﬁles) can be

combined and exported/imported as a single ﬁle.

• Port colors can be independently speciﬁed for each port type. (page 183)

• Default wire thicknesses and types can be independently speciﬁed for each port type.

• An automatic hot-spot connection function has been added. (page 260)

• Port display has been added to External Device, Picture, DME, and ICP1 objects.

• When drawing wires the keyboard cursor keys can be used to move the mouse cursor, and the

<Enter> key can be used to create nodes.

• When drawing wires <Shift> key plus <→> key and <Shift> key plus <←> key combinations can

be used to automatically connect horizontally-aligned hot spots.

• DME object ports can be freely speciﬁed.