Owner's Manual

M7CL V2 Editor Owner’s Manual
52
CInput patch
Click the CHANNEL field, and choose one of the following as the signal route that will
be patched to the input channel(s) of the currently selected GEQ module.
(
*
)
INPUT CH 33-48 can be viewed only if 48 is selected in the Input Channels field of the Mixer Setup
window when editing offline, or when editing online with the M7CL-48.
The channel name is shown in the boxes immediately below.
D Input meter
This indicates the level of the signal that is being input to the currently selected GEQ
module.
E Output patch
Click the CHANNEL field, and choose one of the following as the signal route that will
be patched to the output channel(s) of the currently selected GEQ module.
(
*
)
INPUT CH 33-48 can be viewed only if 48 is selected in the Input Channels field of the Mixer Setup
window when editing offline, or when editing online with the M7CL-48.
The channel name is shown in the boxes immediately below.
F Output meter
This indicates the level of the signal that is being output to the currently selected GEQ
module.
NONE No assignment
MIX 1–16 MIX channel 1–16
MATRIX1-–8 MATRIX channel 1–8
ST L, ST R, MONO(C) STEREO channel L/R, MONO channel
INS CH 1–48
(
*
)
INPUT CH 1–48
(
*
)
insert in
INS MIX 1–16 MIX channel 1–16 insert in
INS MATRIX1–8 MATRIX channel 1–8 insert in
INS ST L, INS ST R, INS MONO(C) Insert-in of STEREO channel L/R or the MONO channel
NONE No assignment
CH 1–48
(
*
)
INPUT CH 1–48
(
*
)
STIN1L-STIN4R ST IN channel 1–4 (L/R)
INS CH 1–48
(
*
)
INPUT CH 1–48
(
*
)
insert out
INS MIX 1–16 MIX channel 1–16 insert out
MATRIX INSERT1–8 MATRIX channel 1–8 insert out
INS ST L, INS ST R, INS MONO(C)
Insert-out of STEREO channel L/R or the MONO channel
3 4
6
5