Owner's Manual

M7CL V2 Editor Owner’s Manual
50
A Mount
Select a GEQ module or effect module for mounting in the rack, from the following choices.
B Input patch
Select the input port(s) that will be assigned to the rack, from the following choices.
(
*
)
INPUT CH 33-48 can be viewed only if 48 is selected in the Input Channels field of the Mixer Setup window when editing offline, or
when editing online with the M7CL-48.
This is not shown if nothing is mounted in the rack.
C Module graphic
This area shows a graphic of the GEQ module or effect module that is currently assigned to the rack, and the
parameters of that module. You cannot edit the parameters in this screen.
Double-click this to open the module editor for that rack unit.
By holding down the <Ctrl> key of your computer keyboard and double-clicking this, you can open multiple
rack module editors. For these additional editors, the rack select buttons are not linked with the RACK popup
window of the M7CL itself.
D Input meter/Output meter
These indicate the level of the signals being input and output from the rack.
E Output patch
Select the output port(s) that will be assigned to the rack, from the following choices.
(
*
)
INPUT CH 33-48 can be viewed only if 48 is selected in the Input Channels field of the Mixer Setup window when editing offline, or
when editing online with the M7CL-48.
F ON, BYPASS
This switches the GEQ module or effect module between active and bypassed states.
A GEQ module is active when the ON button is lit.
An effect module is active when the BYPASS button is dark.
BLANK No assignment
31 Band GEQ 31-band 1-in/1-out graphic equalizer
Flex15GEQ
2-in/2-out graphic equalizer that allows any fifteen of the 31
bands to be controlled
EFFECT Internal effect (only for RACK 5–8)
NONE No assignment
MIX 1–16 MIX channel 1–16
MATRIX1-8 MATRIX channel 1–8
ST L, ST R, MONO(C)
STEREO channel L/R, MONO channel
INS CH 1–48
(
*
)
INPUT CH 1–48
(
*
)
insert in
INS MIX 1–16 MIX channel 1–16 insert in
INS MATRIX1–8 MATRIX channel 1–8 insert in
INS ST L, INS ST R, INS
MONO(C)
Insert-in of STEREO channel L/R or the MONO channel
NONE No assignment
CH 1–48
(
*
)
INPUT CH 1–48
(
*
)
STIN1L-STIN4R ST IN channel 1–4 (L/R)
INS CH 1–48
(
*
)
INPUT CH 1–48
(
*
)
insert out
INS MIX 1–16 MIX channel 1–16 insert out
INS MTRX1–INS MTRX8 MATRIX channel 1–8 insert out
INS ST L, INS ST R, INS
MONO(C)
Insert-out of STEREO channel L/R or the MONO channel