Owner's Manual
M7CL V2 Editor Owner’s Manual
2
Overview of M7CL V2 Editor
M7CL V2 Editor (hereinafter called “M7CL Editor” in this document) enables you to remotely control a Yamaha
M7CL mixing console (Version 2) (such as M7CL-48 or M7CL-32; hereinafter collectively called “M7CL” in this doc-
ument). M7CL V2 Editor also enables you to save the parameter settings on your computer. To use M7CL Editor, you
must first perform the following operations:
1 Start and configure Studio Manager.
2 Start and configure M7CL Editor.
3 Synchronize M7CL Editor with your M7CL console (
➥
p.8).
For more information on using Studio Manager, refer to the Studio Manager Owner’s Manual.
Configuring M7CL Editor
You must configure the following settings for each open Editor.
• Before you make the following settings, you must make settings for the DME-N Network Driver and
select the MIDI port in the Setup window of Studio Manager.
•To open an editor, double-click the icon for the desired editor in the Studio Manager window.
❏
System Setup
To open the System Setup window, choose [System Setup] from the [File] menu.
Be sure to specify the Input port and Output port.
A
Input port/Output port
From the ports you specified in Studio Man-
ager, select the ports that the editor will use
to communicate with the M7CL console.
B
Fast Sync
This allows synchronization to be speed up,
reducing the time required. Use this check
box to choose whether to enable this func-
tion.
C
Window Control from Console
This option determines whether or not using
the USER DEFINED KEYS on the console
enables you to remotely open and close the
M7CL Editor windows.
D
Level Meter
By disabling the meter function you can reduce the processing load caused by screen drawing and communica-
tion. This option specifies whether the level meter functionality will be enabled.
E
Confirmation
These check boxes specify whether a confirmation dialog box will appear when you store (Store Confirmation),
recall (Recall Confirmation), patch (Patch Confirmation), or make a patch change that would modify an existing
patch (Steal Patch Confirmation).
F
Administrator Password
Enter the Administrator password that was specified on the M7CL console. If this password is not entered cor-
rectly, it will not be possible to synchronize from M7CL Editor to the M7CL console.
Getting Started
NOTE
NOTE
NOTE
2
5
6
3
4
1