User Manual

18
● Changing the device number
If you are using multiple UX16s, you can change the device number.
Click “Device Name.” The System displays the drop-down list. Select the device
for which you wish to change the setting.
If you are using a Macintosh computer, the device name is assigned as follows:
• Mac OS X: “YAMAHA UX16”, “YAMAHA UX16 2”, etc.
● Checking the signal path
To see if the MIDI device is connected correctly, you can try transmitting MIDI
signals.
• Note Off Message
When you click [Send All Note OFF], a MIDI All Note Off message will be sent
to the UX16.
• Note On Message
When you click [Send All Note On], a MIDI All Note On message will be sent
to the UX16.
● Changing connections during playback (PC OUT→MIDI OUT)
The left column shows the computer’s output port (OUT 1), and the top column
shows the UX16’s output port (1). If you remove the check box, a MIDI signal
from the computer to a MIDI device does not flow.
● Changing connections during recording (MIDI IN→PC IN)
The left column shows the computer’s input port (IN 1), and the top column
shows the UX16’s input port (1). If you remove the check box, a MIDI signal from
a MIDI device to the computer does not flow.
NOTE