Electronic Keyboard User Manual
Table Of Contents
- Introduction
- Features
- Included Accessories
- About the Included Software
- Table of Contents
- Turning the Power On and Off
- Front and Rear Panels
- What You Can Do With the KX
- Setting Up
- Using the KX with Cubase
- Basic Operation on the KX
- Control Templates
- Arpeggio
- Using the KX with a DAW Other than Cubase
- Utility Settings
- Troubleshooting
- Message List
- TOOLS for KX LICENSE AGREEMENT
- Cubase AI4 LICENSE AGREEMENT
- Appendix
- MIDI Implementation Chart
- Index
Front and Rear Panels
Owner’s Manual
11
&
CUBASE FUNCTION [A] and [B] buttons
..........................................................Page 23
These buttons let you control certain
assignable functions within Cubase.
* PROGRAM [DEC] and [INC] buttons
..........................................................Page 19
Use these buttons to select the particular
instrument of the VSTi assigned to the selected
track.
( Cursor buttons ................................Page 25
These buttons function the same as the cursor
keys on your computer.
º [ESC] button ....................................Page 25
This button functions the same as the ESC key
on your computer.
¡ [ENTER] button................................Page 25
This button functions the same as the ENTER
key on your computer.
™ Track Control buttons.....................Page 25
These buttons let you control the Mute and Solo
functions on the selected track within Cubase.
£ Transport Control buttons..............Page 25
These buttons let you control transport
functions, including record and play, within
Cubase.
¢ Pitch Bend wheel .................... Pages 12, 17
Controls the pitch bend effect, making
continuous pitch change.
∞ Modulation wheel.................... Pages 12, 17
Controls the modulation effect.
§ [STANDBY/ON] switch......................Page 9
Press this switch to turn the power on or off
(STANDBY).
¶ DC IN connector................................ Page 9
Connect an AC adaptor to this jack.
• MIDI IN connector ...........................Page 16
This connector is used to receive MIDI
messages transmitted from an external MIDI
device.
ª MIDI OUT connector .......................Page 16
This connector is used to transmit MIDI
messages to an external MIDI device.
‚ SUSTAIN jack .................................. Page 16
Connect an optional footswitch (such as
Yamaha FC4 and FC5) to this jack.
⁄ USB TO HOST connector ............... Page 16
This connector is used to connect the keyboard
and the computer by using a USB cable. Since
the KX is bus-powered, the power can be
supplied from the computer to the KX via this
connector.
º ¡
™
£
*
&
% ^
(
§
¶
•
ª
‚
⁄